ENALKA ALKALITY FILTER
SPECIFICATION SHEET
The Enalka Filter is an ultra clean white granular media, 100% environmentally safe.
Our Enalka filter has a clear filter housing that is 2” diameter x 10” long, both ends of the filter housing have ¼” NPT connections. In each filter there is 3 lbs of Enalka media.
The Enalka clear filter housing is rated for 100psi operating pressure.
pH Sample |
Before Enalka |
After Enalka |
Distilled water |
5.8 |
7.1 |
Reverse Osmosis water |
6.0 |
7.3 |
|
|
|
Calcium Content : |
|
|
Distilled water |
<0.5 mg/l |
7.1 mg/l |
Reverse Osmosis water |
<0.5 mg/l |
8.4 mg/l |
|
|
|
Results from laboratory analysis: |
|
|
Contaminant |
Result |
Acceptable Limit |
Salmonella |
Non-detect |
1 ppm |
Ecoli Petrifilm |
Non-detect |
3 ppm |
Mold Petrifilm |
Non-detect |
5 ppm |
Total Coliform |
Non-detect |
3 ppm |
Magnesium |
2.5% |
N/A |
Lead |
Non-detect |
1 ppm |
Arsenic |
Non-detect |
0.02 ppm |
Mercury |
Non-detect |
0.02 ppm |
Calcium |
40.4% |
N/A |
Taste/Odour |
Neutral |
|
Particle Size |
10 – 30 mesh |
|
Bulk Density |
1.3 – 1.5 g/ml |
|
Sterilization Process |
Ozone Vacuum Process |
|
<< back to previous page
|